Welcome to Expresscraft Boats

HARDWARE

EXPRESSDRIVE:       Price $ 69.95 Application:    Gas powered DEEP V'S.    Surface drive unit that places the prop 4" to 5" from transom. This is the best placement on most all GAS DEEP V'S. The distance from the transom is adjustable, outdrive up and down trim are also adjustable. On SMALLER DEEP V'S such as the Phantom II or the Race V we recommend mounting the drive 1/4" from bottom of the V. That allows more boat in the water for better control. On LARGER BOATS MOUNT AS LOW AS POSSIBLE. This drive is a race drive and the boat will NOT make good left hand turns. This is due in large from the torque  of the motor. Sport Drive:  85.95 Our Sport Drive is most likely one of the best values in gas hardware, it locates the prop 4" off the transom. Perfect for most Deep V gas boats and also has the rudder behind the prop for great turning left and right. All in one bag, less the prop. Bag includes: Rudder 7.00, Pivot Block 6.00, Pivot Pin 1.50, Tiller Arm 2.50, Bracket 28.00, Strut 9.00, 250. Reducer 5.00, Lead Teflon bearing 3.95, Ferral 2.95, Drive Dog 2.50, Prop Shaft 4.00, Prop Nut .30 Nuts and Bolts 5.00, Shaft Square 8.00 TOTAL = 85.95       With pre assembled Aeromarine Cable 98.75     SURFACE DRIVE:                       Rudders: Billet Series 64.95    Not the cheapest rudder out but they sure are nice. Our long rudder is great for 41" or larger gas Deep V's. They are the perfect match for our Expressdrive Surface unit. This rudder places the leading edge of the blade 4.5" from the transom. The short Rudder 3.5" from the transom was designed for cats and is as stunning as a rudder can be. They both feature a kick up bracket and very aggressive water pick up. Also includes brass tiller arm.

NEW

Need to save space on your transom? Give our under the hull water pick ups a try. Water lines are already in the boat. No need for thru hull fittings or transom mount water pickups. 33.95 each..All quality billet machined aluminum. No cheap plastic here.

NEW IN LINE TWIN: All parts necessary to join G23's 231's or 260 Zenohas to a fire breathing inline twin. 175.00 includes all hardware and joining collet. 

NEW

PIPE KEEPER    30.00

These machined aluminum pipe clamps keep your pipe from turning on the header by picking up the water fitting. And keeps it from creeping forward by being clamped in place.

TEST BED: Our new inline twin. And custom fuel tanks we will be making available soon. Also checkout aluminum radio box and exhaust tips. Radio box available now 69.00. 

Stuffing Box Support: 25.00

All parts necessary to join G23's 231's or 260 Zenohas to a fire breathing inline twin. 175.00 includes all hardware and joining collet. 

Throttle linkage to connect two carburetors 50.00

Our New Expressdrive II comes with water pickups built right in.  Takes up a minimal amount of space on your transom. Comes with reducer bushings and lead Teflon bearings installed. Ready for your 1/4" cable. 69.95